Ezi-Crown – Temporary Dental Crown Resin

Here is the complete English translation of the two images, organized for your dental product catalog.

Product Information

Intended Use: A dental polymer material used to fabricate temporary restorations, including temporary crowns and bridges, until permanent prosthetic restorations are completed.

01 — Instructions for Use

A. Preparation Before Use

1. Before use, check the product's expiration date and inspect for foreign substances, impurities, discoloration, deterioration, or other abnormalities.

2. Read the manufacturer's instructions carefully and follow the recommended procedures.

3. Remove the cap and prepare the necessary filling or dispensing instruments.

4. Protect the oral cavity using a rubber dam.

B. Application Procedure

1. Open the container and use an appropriate instrument to cut or remove the required amount of material.

2. Press the material onto the prepared abutment tooth.

3. Shape the material using a spatula and your fingers.

4. Have the patient bite gently to record the occlusion.

5. Adjust the margins and refine the shape as necessary.

6. Perform preliminary polymerization (curing) inside the mouth for approximately 10 seconds.

7. Complete the final polymerization outside the mouth. Light-cure each internal margin for 20 seconds.

8. Adjust the shape using a carbide bur or another suitable instrument.

9. Adjust the occlusion and seat the temporary restoration in the patient's mouth.

C. Storage and Handling After Use

1. Because the material hardens when exposed to light, place it back into its light-blocking silver pouch immediately after use.

2. Store in a cool, dry place.

3. Keep away from direct sunlight.

4. Do not store near heating equipment.

5. Keep out of reach of children.

02 — Precautions for Use

A. Warnings

1. Do not use this product on patients with a history of allergic reactions, such as skin rashes or dermatitis, associated with the product.

2. If allergic symptoms such as a rash develop during use, discontinue use immediately and consult a dermatologist or appropriate medical specialist.

B. General Precautions

1. Uncured resin may cause skin sensitivity in certain individuals. If contact occurs, thoroughly wash the affected skin with soap and water.

2. This product is intended for use only inside the oral cavity. Wear appropriate protective equipment to prevent contact with the eyes. If the material enters the eyes, rinse immediately with clean water and seek examination by an ophthalmologist.

3. Do not use the product for purposes other than its intended application. Use by non-professionals is prohibited.

4. This product cannot be prescribed or used for internal administration.

C. Application Precautions

1. Protect the airway before beginning the procedure.

2. Seal the container completely after use.

3. Do not mix this product with other materials.

03 — Product Storage Conditions

• Storage Temperature: 1–30°C

• Store at room temperature within the specified range.

• Protect from direct sunlight and excessive heat.

04 — Product Packaging

Total Net Weight: 30 g

05 — Shelf Life

3 years from the date of manufacture.